KustomTech grips satin 22 mm (7/8 inch)

Description

The KustomTech grips satin 22 mm (7/8 inch) you see here is machined in Italy. It changes how the handlebar feels from the first mile. It starts from billet-machined metal. Afterwards, the satin finish is applied by hand. Indeed, you feel the density the moment you pick it up.

What this KustomTech grips satin 22 mm brings you

KustomTech does not cast its parts. The brand cuts them on CNC machines instead. Indeed, solid stock handles twin vibration better than a casting.

These parts answer each other. As a result, a Deluxe-equipped bar is easy to spot.

The spec sheet at a glance

• Brand: KustomTech, made in Italy
• Material: billet-machined metal
• Finish: satin
• Handlebar diameter: 22 mm (7/8 inch)
• Weight: 0.25 kg
• Manufacturer reference: KT-04-036-SATIN

The style this part speaks to

On a chopper, the line matters above all. Therefore a crisp part carries the eye further. On a bobber, it brings the contrast that was missing.

One part is sometimes enough to restart a project. Still, the effect grows when the rest follows the same line.

Installation on your bike

Fitting calls for a 22 mm (7/8 inch) handlebar. First, measure your tube. Then check the room left around the controls.

Plan for standard tools and a little method. Besides, we gladly check fitment with you before you confirm the basket.

Everyday care

Think about routine care too. First, dry the part after every wet ride. Then protect it with a soft wax before winter. Above all, forget abrasive sponges. That way, the look stays the same season after season.

Buy with confidence

You order from a European shop, with a European invoice. Consequently, no customs charge waits for you. Payment runs through Stripe or PayPal. Moreover, you keep fourteen days to change your mind.

Browse the rest of our KustomTech catalogue. For official dimensions, check the manufacturer site KustomTech.