Kustom Tech master cylinder 14 mm bore rebuild kit

Description

The KustomTech master cylinder 14 mm bore rebuild kit you see here is machined in Italy. It turns finger pressure into real braking force. The material sets the tone: billet-machined metal. Next, a hand-worked finish goes on by hand. In practice, that weight in the hand tells you a lot.

Why this KustomTech master cylinder 14 mm bore changes the look

Everything starts from a solid block. CNC machines remove the metal, then an operator finishes the piece by hand. Therefore, every unit gets an individual check.

Consistency is the real argument here. In fact, risers, levers and grips share the same curves.

Technical specifications

• Brand: KustomTech, made in Italy
• Material: billet-machined metal
• Bore: 14 mm
• Weight: 0.5 kg
• Manufacturer reference: 00-006

Which build it suits

A stripped bobber puts every detail on show. So a machined part stands out at once. On a long chopper, it balances the volumes.

Some builders equip the whole bar at once. Others move one piece at a time. Both work, because the range stays consistent.

Before you fit the part

Fitting stays simple on a classic custom base. First, compare it with your current part. Then plan the right hardware.

Nothing dramatic for anyone who has worked on their own bike. That said, confirm the dimensions first. Send us a photo and we will look.

Keeping the finish intact

One last practical tip. Polished metal asks for little, but it asks regularly. A dry cloth usually does the job. However, road salt should come off straight away. Therefore a quick rinse after winter extends the finish.

What we guarantee

Stock sits in France. As a result, shipping starts quickly after your order. Card or PayPal, your choice. Then you still have fourteen days to send the part back.

Browse the rest of our KustomTech catalogue. For official dimensions, check the manufacturer site KustomTech.